How to Install Wheel Covers on Cybertruck 20" Cyber Wheels

Quick answer

Installing wheel covers on Cybertruck 20" Cyber Wheels is a simple snap-fit process that takes about 10 minutes. No tools or adhesives are needed, but proper alignment is critical to avoid scratching the rim.

Installation steps

1. 1. Clean the wheel center: Wipe the center bore of the wheel with a microfiber cloth to remove dirt, brake dust, or moisture. Any debris can prevent the cover from seating flush. Check for leftover adhesive from previous wheel weights or center caps; remove it completely.
2. 2. Align the cover with the wheel: Hold the cover so the inner tabs match the wheel's center bore openings. The cover should sit evenly without tilting. Do not force it; if it doesn't align, rotate the cover slightly. Common mistake: installing the cover upside down. Look for the raised center logo or texture to confirm orientation.
3. 3. Press firmly into place: Using the palm of your hand, press the center of the cover until you hear a click or feel it snap into the bore. Work around the edges if needed, but avoid hitting the rim with tools. If the cover doesn't click, it may be misaligned. Remove and restart from step 2 rather than forcing it.
4. 4. Verify fit and repeat: Give the installed cover a gentle tug to confirm it's secure. It should not wobble or come loose. Repeat steps 1-3 for the remaining three wheels. After driving a short distance, recheck each cover. A slight re-seat may be needed if the cover shifts during the first drive.

Product details

• Wheel Covers for Cybertruck (Set of 4) - Center Hub Caps for 20" Cyber Wheels: Crafted with durable Carbon Fiber infused ABS, designed to complement Cybertruck all-terrain wheels by keeping the same design language as the rims. The carbon fiber infused ABS material resists cracking and UV fading, so the covers maintain their look over time without adding significant weight.