Two ways to protect Rivian R1T and R1S headlights
If you want to shield your Rivian’s headlights from rock chips and road debris, you’ll find two main options in the Headlights Clear PPF / Smoke Tint kit: clear paint protection film (PPF) and tinted film. Both are pre-cut for the R1T and R1S, but they serve different priorities. Clear PPF preserves the factory look while adding a sacrificial layer. Smoke tint darkens the lens and also adds protection, but it changes your light output and may run into local regulations. This comparison breaks down the tradeoffs so you can choose the right film for your truck or SUV.
Clear PPF vs. smoke tint: key differences
- Appearance: Clear PPF is virtually invisible and keeps your headlights looking stock. Smoke tint darkens the lens for a custom look; the darkness depends on the VLT (Visible Light Transmission) you choose.
- Light output: Clear PPF lets virtually all light through. Smoke tint reduces light transmission: 50% VLT means half the light passes through, while 30% VLT is darker and lets less light through.
- Protection: Both options use 8mil ultra-premium PPF that is self-healing and stain resistant, and both protect against rock chips. The tinted version adds the same protection while changing the look.
- Coverage: The pre-cut film covers the light source area and a little extra around it on all sides. It does not cover the entire headlight body (side and front) or the light bar. This is intentional for easy DIY installation without a heat gun.
- Legal considerations: Tinted headlights may be restricted in some areas. Check your local laws before choosing smoke tint; clear PPF is less likely to raise legal issues, but always verify.
What the Rivian headlight film kit includes
- Headlights Clear PPF / Smoke Tint for Rivian R1T & R1S: Made with ultra-premium PPF (8mil, self-healing, stain resistant) Both clear and tinted options use the same base film technology, so protection quality is consistent across variants.

Headlights Clear PPF / Smoke Tint for Rivian R1T & R1S - Headlights Clear PPF / Smoke Tint for Rivian R1T & R1S: 8mil tint acts as PPF and protects your headlights & fog lights from rock chips Smoke tint isn’t just cosmetic—it provides the same chip protection as clear film.
- Headlights Clear PPF / Smoke Tint for Rivian R1T & R1S: Precision cutout that doesn't require a heat gun or special skills You can install either film at home without professional tools.
- Headlights Clear PPF / Smoke Tint for Rivian R1T & R1S: Install in 20 minutes. Easy to remove/replace. Both options are reversible, so you can change your look or replace film if needed.
VLT explained: choosing between 30% and 50% smoke tint
VLT stands for Visible Light Transmission—the percentage of visible light that passes through the film. The smaller the VLT number, the darker the film and the less light that reaches the road. For Rivian headlights, smoke tint is available in Dark Smoke (30% VLT) and Medium Smoke (50% VLT). If you want a subtle tint that maintains better night visibility, 50% VLT is the safer choice. Dark Smoke at 30% VLT gives a more aggressive look but reduces light output more significantly. Neither option is as bright as clear PPF, which has no tint.
Keep in mind that your headlights are a critical safety feature. Before choosing a dark tint, consider how much night driving you do and whether your local laws permit tinted headlights. The product page includes a warning to check your local laws—take that seriously.
Installation: what you need and what to expect
Both clear and tinted films install the same way. The kit includes pre-cut PPF/tint cutouts and a squeegee. You’ll also need a spray bottle filled with soapy water (you supply the bottle and soap). No heat gun is required thanks to the precision cutout. The film covers the main light area and a small border, but not the entire headlight housing or light bar. This design makes DIY installation feasible for most people in about 20 minutes.
- Preparation: Clean the headlight surface thoroughly before applying film. Use the soapy water spray to allow repositioning.
- Application: Peel the film, spray both the lens and the film, position it, and squeegee out air bubbles and excess water.
- Curing: Allow the film to dry and adhere fully. Small bubbles may disappear after a few days.
Fitment: Gen1 and Gen2 Rivian models
- Headlights Clear PPF / Smoke Tint for Rivian R1T & R1S: Fits Gen1: Rivian R1S 2022-2024, Rivian R1T 2021-2024 If you own an earlier Rivian, choose the Gen1 variant to ensure proper fit.
- Headlights Clear PPF / Smoke Tint for Rivian R1T & R1S: Fits Gen2: Rivian R1S 2025-2026, Rivian R1T 2025-2026 Newer Rivians require the Gen2 cutout; the headlight shape may differ.
Which should you choose for your Rivian?
Choose clear PPF if you want maximum light output, a factory appearance, and no legal ambiguity. It’s the set-and-forget option for protection. Choose smoke tint if you want to customize your Rivian’s look and are willing to accept reduced light transmission and the responsibility of checking local laws. For a balance of style and visibility, Medium Smoke (50% VLT) is a reasonable compromise; Dark Smoke (30% VLT) is for those who prioritize appearance and understand the tradeoff.
Whichever you pick, the Headlights Clear PPF / Smoke Tint for Rivian R1T & R1S offers a straightforward DIY way to protect your investment. Just confirm your model year and generation before ordering, and remember that the film doesn’t cover the entire headlight housing—by design, to keep installation simple.


