Rivian R1T and R1S Jack Puck Kit: Lifting Your EV Safely
By Abstract Ocean | Tesla & Rivian Accessories | A Texas Co. est | Published: 2026-11-01
Category: How-to Guides
Learn how to use a Rivian jack puck kit to lift your R1T or R1S safely for tire changes. Step-by-step guidance and common mistakes to avoid.
Quick answer
Use a Rivian jack puck kit to protect your R1T or R1S lift points and avoid damaging the battery pack or frame rails. The magnetic jack puck stays in place on the jack, making alignment easier and safer.
Why Rivian jack points need extra care
The Rivian R1T and R1S have specific jack points that are recessed behind plastic panels. Without a jack puck, a floor jack can contact the battery pack or frame rail, potentially causing costly damage. A jack puck fills the gap and distributes the load evenly.
Magnetic jack pucks are especially helpful because they attach to the jack saddle, freeing your hands to position the jack correctly. This reduces the risk of the puck slipping or falling during setup.
When a jack puck kit is the right choice
If you change tires at home, rotate wheels, or visit a shop that may not be familiar with Rivian jack points, a jack puck kit is a smart investment. It also helps when switching to winter tires or installing new ones.
However, if you always have service done at a Rivian-certified facility, they may already have the necessary equipment. Still, having your own puck ensures consistency and protects your vehicle wherever you go.
Step-by-step: Lifting your Rivian with a jack puck kit
- Park on a level surface and engage parking brake: Choose a flat, solid surface like concrete or asphalt. Engage the parking brake and put the vehicle in Park. Common mistake: parking on a slope or soft ground, which can cause the jack to tip. Always check for stability before lifting.
- Locate the correct jack points: Consult your owner's manual for the exact jack point locations on your R1T or R1S. They are typically behind small plastic covers near the wheels. Common mistake: assuming the points are the same as other trucks; Rivian's points are specific. Identify all four points before starting.
- Attach the magnetic jack puck to the jack saddle: Place the magnetic puck on the center of your floor jack's saddle. The magnet will hold it in place. Common mistake: forgetting to align the puck's raised center with the jack point recess. Ensure the puck sits flat and centered.
- Position the jack under the jack point: Slide the jack under the vehicle and align the puck with the jack point. Raise the jack until the puck contacts the point. Common mistake: lifting before confirming alignment, which can damage the battery pack. Double-check alignment before lifting.
- Lift the vehicle slowly and steadily: Raise the jack until the tire is just off the ground. Place jack stands under the frame for added safety if you'll be working under the vehicle. Common mistake: lifting too high unnecessarily, which reduces stability. Lift only as high as needed for the task.
- Perform your tire change or rotation: Remove the wheel and replace or rotate as needed. Common mistake: overtightening lug nuts; use a torque wrench set to Rivian's specification. Always use a torque wrench for final tightening.
- Lower the vehicle carefully: Slowly lower the jack until the tire touches the ground, then remove the jack and puck. Common mistake: lowering too quickly, which can cause the puck to shift. Lower in a controlled motion.
Product facts
- Magnetic Jack Puck Kit for Rivian R1T & R1S: Magnetic jack pucks designed by a fellow Rivian owner to fit R1T and R1S jack points without removing plastic panels. Saves time and avoids the hassle of disassembling trim, while ensuring a secure lift.
Magnetic Jack Puck Kit for Rivian R1T & R1S
