Trunk and Frunk Organizers for Rivian: Keeping Your Gear in Place
By Abstract Ocean | Tesla & Rivian Accessories | A Texas Co. est | Published: 2026-09-23
Category: Product Reviews
A practical guide to Rivian trunk and frunk organizers, plus storage inserts that stop rattles and keep essentials in place. Learn what fits R1T and R1S and how to choose.
Quick answer
For most Rivian owners, the best setup is a frunk organizer for the front and a trunk organizer for the rear. If you want a low-cost, vehicle-specific fix, start with a center console storage insert like the Slidable Half Armrest Organizer for Cybertruck (it also fits Rivian? No, it is Cybertruck-specific). For Rivian, look for organizers that list R1T or R1S fitment explicitly. A HEPA cabin filter is not an organizer, but it is a useful storage-adjacent upgrade for keeping the cabin clean.
Rivian R1T and R1S owners have plenty of cargo space, but space alone does not keep gear from sliding, rattling, or disappearing under seats. A good Rivian trunk organizer or frunk organizer turns open cavities into defined zones, so groceries, tools, and charging gear stay put.
This guide covers what to look for, how to choose between soft and hard organizers, and which Rivian storage accessories actually earn their place. We will also flag a few non-organizer products that solve related problems, like keeping the cabin air clean or protecting high-wear surfaces.
Soft vs. hard organizers: which one fits your Rivian
Soft organizers are usually collapsible fabric or nylon bins with handles. They are light, cheap, and easy to remove when you need the full trunk floor. The trade-off is that they can still slide on smooth plastic or carpet unless you use a non-slip mat or anchor them. Hard organizers, typically molded plastic or ABS with liners, hold their shape and resist spills better. They add a bit more weight and take up permanent space, but they stop rattling and keep small items from rolling under seats.
For the frunk, hard organizers tend to work better because the frunk is shallow and often used for charging cables, adapters, and tools. In the rear trunk, soft bins are more flexible if you regularly haul large items. Many owners use a hybrid: a hard insert in the console or frunk, and a soft bin in the trunk.
- Measure the deepest and widest part of your frunk or trunk before buying; organizers that fit an R1T may not fit an R1S.
- Look for organizers with a lip or handle so you can lift them out without dumping contents.
Fit guidance for R1T and R1S
The R1T and R1S share a platform but not identical cargo dimensions. The R1T has a gear tunnel and a bed, while the R1S has a rear cargo area behind the third row (if equipped) and a front trunk. That means a Rivian trunk organizer designed for the R1T bed may not fit the R1S cargo floor, and vice versa. Always check the product listing for explicit R1T or R1S fitment, and note the model year or generation if listed.
If a product does not state fitment, treat that as a decision limitation. You can still use universal bins, but you will need to measure and possibly add grip tape or a cargo bar. For vehicle-specific inserts, like the Slidable Half Armrest Organizer for Cybertruck, the listing is clear about the intended vehicle; do not assume it fits a Rivian.
- Check whether the organizer is designed for the frunk, trunk, bed, or gear tunnel.
- Confirm the organizer does not block access to the spare tire, charging port, or under-floor storage.
Materials and rattling: what actually keeps gear quiet
Rattling usually comes from hard items moving against hard surfaces. Organizers with premium leather liners or soft inserts reduce noise because they cushion the contents. Molded plastic organizers without liners can be noisy unless you add foam or felt. If you carry metal tools or water bottles, look for organizers that describe liners or compartments designed to minimize rattling.
For example, the Lower Armrest Organizer for Cybertruck uses durable ABS and premium leather liners, and the Slidable Half Armrest Organizer for Cybertruck uses durable plastic with premium leather liners. Both are Cybertruck-specific, but they illustrate the material difference: liners and compartment design matter more than the outer shell alone. When shopping for Rivian, apply the same logic: prioritize organizers that describe how they hold items in place.
- If the listing does not mention liners, plan to add your own foam or felt.
- Avoid organizers with sharp interior edges that can scratch tools or gear.
Storage accessories that pair well with organizers
Organizers work best as part of a system. A trunk organizer keeps groceries upright, but a cargo net or tie-down can stop the whole bin from sliding. In the frunk, a dedicated insert for charging adapters keeps cables from tangling with other gear. If you carry messy items, a collapsible bin with a waterproof liner is easier to clean than a carpeted one.
Do not overlook cabin air quality if you store gear that brings in dust or pollen. The Rivian R1T & R1S HEPA+Activated Carbon Cabin Air Filter is a direct-fit filter for Gen1 (2022-2024) and Gen2 (2025) R1T and R1S. It removes 99.976% of particulates greater than 0.3 μm, including pollen, and the activated carbon captures VOCs and gases. It is not an organizer, but it helps keep the cabin fresher when you are hauling gear.
- Pair a soft trunk bin with a cargo bar or net if you drive on rough roads.
- Keep a small bin in the frunk just for charging adapters and gloves.
Decision rules for buying a Rivian organizer
- If you need frunk storage for cables and tools: Choose a hard, vehicle-specific frunk organizer with compartments and a liner. Soft bins collapse and can tangle cables. Check that the listing explicitly says R1T or R1S frunk fitment.
- If you haul groceries or odd-shaped items in the trunk: Choose a soft, collapsible trunk organizer with handles and a non-slip base. Add a cargo bar if you drive on rough roads. Measure your trunk floor and leave room for the tailgate to close.
- If rattling bothers you: Prioritize organizers with premium leather liners or foam padding. Avoid bare plastic trays unless you add your own felt. Liners and compartment dividers do more for quiet than thick plastic walls.
- If you are unsure about fitment: Do not assume a Cybertruck or Model 3 insert will fit a Rivian. Look for Rivian-specific listings, or use universal bins with adjustable dividers. When fitment is not stated, treat it as a limitation and measure before buying.
Product facts to know
- Slidable Half Armrest Organizer for Cybertruck - Center Console Storage Insert: Crafted with durable plastic and premium leather liners, each compartment is designed to keep essentials organized and minimize rattling. Proudly made in the USA. This shows the value of liners and compartment design for quiet, organized storage. It is Cybertruck-specific, so Rivian owners should look for an equivalent insert that lists R1T or R1S fitment.
- Lower Armrest Organizer for Cybertruck - Storage Insert: Crafted with durable ABS and premium leather liners, each compartment is designed to keep essentials organized and minimize rattling. Proudly made in the USA. ABS holds its shape better than soft fabric, which helps with heavier small items. Again, this is a Cybertruck part; use it as a benchmark for material quality when choosing a Rivian organizer.
- Rivian R1T & R1S HEPA+Activated Carbon Cabin Air Filter: HEPA H11 filter element removes 99.976% of particulates greater than 0.3 μm including pollen and other allergens (may result in a minor restriction to airflow). Activated carbon captures VOCs and gases including carbon monoxide and sulfur dioxide. Compatible with Rivian R1T and R1S Gen1 (2022-2024 / All Trims) and Gen2 (2025 / All Trims). If you store gear that brings dust or pollen into the cabin, this filter helps keep the air cleaner. It is not an organizer, but it is a practical add-on for Rivian owners who care about cabin air quality.
Who should buy a Rivian organizer
Best for
- Rivian R1T and R1S owners who carry groceries, tools, or charging gear and want to stop sliding and rattling
- Owners who want a dedicated frunk setup for cables and adapters
- Anyone who prefers a vehicle-specific insert over a universal bin
Not for
- Owners who need to haul large, irregular cargo and want maximum open space
- Cybertruck owners looking for a Rivian-specific part (choose a Cybertruck-specific organizer instead)
- Shoppers who are not willing to measure their trunk or frunk before buying
A Rivian trunk organizer and frunk organizer are simple upgrades that make daily driving less messy. Focus on fitment first, then materials and liners. If you are unsure, start with one well-reviewed bin for the frunk and one for the trunk, and adjust from there.

