العودة إلى المدونة
أدلة إرشادية 2026-11-16 Abstract Ocean | Tesla & Rivian Accessories | A Texas Co. est 0 مشاهدة

Model 3 Trunk Load Area PPF Kit: What the Pre-Cut Pieces Cover

Model 3 Trunk Load Area PPF Kit: What the Pre-Cut Pieces Cover

See what the pre-cut Model 3 trunk load area PPF kit covers, which Model 3 it fits, and how to install it in about 10 minutes with the included tools.

Where the rear bumper takes the hit

The top of the rear bumper is the first surface to meet a suitcase, bike frame, or stroller as you lift it into the Model 3 trunk. That repeated contact leaves scuffs and scratches in the paint, and once the clear coat is marked, the damage is visible every time you open the trunk.

The Paint Protection (PPF) Kit (Trunk Load Area) for Model 3 puts a clear film layer over that vulnerable lip. It is aimed at owners who regularly haul baggage, bikes, baby strollers, or other cargo through the trunk opening.

What comes in the kit

  • Paint Protection (PPF) Kit (Trunk Load Area) for Model 3: Includes an XPEL PPF kit (Ultimate Plus), 1x squeegee, and 1x spray bottle (just add water). You get the film and the basic tools for a wet install in one box, so there is no separate squeegee or spray bottle to source before you start.
    Paint Protection (PPF) Kit (Trunk Load Area) for Model 3
    Paint Protection (PPF) Kit (Trunk Load Area) for Model 3
  • Paint Protection (PPF) Kit (Trunk Load Area) for Model 3: The kit is designed for maximum protection and easy installation, and should take no longer than 10 minutes. That short window makes this a realistic weekend or delivery-day task rather than a full afternoon project.

Pick the cutout for your Model 3

The kit is offered in two versions: Model 3 2018-2024 and Refreshed 2024 Model 3. Choose the one that matches your car before ordering, because the pre-cut shape is made for that bumper profile. If you are unsure which version you have, check your model year and whether your car is the refreshed 2024 design.

A simple peel-and-apply sequence

The supplied information confirms the kit is a wet install with a squeegee and spray bottle, and that it should take no longer than 10 minutes. Use these steps as a practical order of work; they do not replace the film manufacturer's own instructions.

  1. Clean the bumper lip: Wash and dry the top of the rear bumper so the film can bond to a clean surface. Any grit left behind will show under the clear film.
  2. Fill the spray bottle with water: The kit includes a spray bottle; just add water. Wet the bumper lip and the adhesive side of the film so you can position the pre-cut piece before it grabs.
  3. Align the pre-cut film: Set the film on the load area and line up the edges with the bumper contours. Because the piece is pre-cut for your Model 3 version, small adjustments are easier while the surface is wet.
  4. Squeegee out the water: Use the included squeegee to push trapped water and air toward the edges, working from the center outward.
  5. Check the edges: Press down any lifted edges and confirm the film sits flat along the lip. The job should take no longer than 10 minutes.

Pair it with interior trunk sill protection

The bumper lip is only half of the load-area wear point. The interior trunk sill also takes scrapes as cargo slides in and out. The same product listing suggests combining this kit with interior trunk sill protectors for the original or Refreshed Model 3 to complete the package. That gives you film on the outside lip and a protective layer on the inner sill.

Product details at a glance

What the supplied information does not cover

The supplied details do not include a cure time, a recommended water temperature, or a maximum speed before driving after installation. They also do not describe how to remove the film later or how long the XPEL Ultimate Plus material is warranted. If you need those specifics, check the film manufacturer's documentation rather than guessing.

The kit is described as designed for maximum protection and easy installation, but no coverage measurements or film thickness figures are provided. Treat the product photos and the pre-cut shape as your guide to what the pieces cover.

مقالات ذات صلة

Customer Service
الرئيسية
المنتجات
السلة
الملف الشخصي