How to Install the Auto-Lift Kit for Tesla Model S Parcel Shelf
By Abstract Ocean | Tesla & Rivian Accessories | A Texas Co. est | Published: 2026-10-30
Category: How-to Guides
Install the Auto-Lift Kit for your Model S parcel shelf in minutes. No tools or drilling required—just follow these simple steps.
Quick Answer
Install the Auto-Lift Kit for the Tesla Model S parcel shelf in minutes without any tools or drilling. It is discreet, reversible, and restores your trunk to original condition when removed.
Why the Auto-Lift Kit Works
The Auto-Lift Kit is designed by Matthew Martin, a fellow Model S owner and TMC member, so it is built with real-world use in mind. It attaches to the parcel shelf to give you easy one-handed access to the trunk, making it simpler to load groceries or luggage.
Because the kit requires no drilling and no tools, installation is quick and completely reversible. If you ever remove it, your vehicle remains in its original condition—no holes, no marks.
Installation Steps
- Prepare the Parcel Shelf: Lower the parcel shelf to its closed position. Ensure the area is clean and dry so the adhesive mounts stick firmly. Check that the shelf surface is free of dust or moisture before proceeding.
- Attach the Mounting Brackets: Peel the backing off the adhesive on the brackets and press them onto the shelf at the marked locations. Hold each bracket in place for about 30 seconds to ensure a strong bond. If the shelf has a textured surface, press harder to ensure full contact.
- Connect the Lift Struts: Snap the struts onto the brackets. Make sure they are oriented correctly—the strut should lift the shelf smoothly when released. Test the movement by lifting and lowering the shelf a few times; if it binds, reseat the struts.
- Final Check: Open and close the trunk to confirm the shelf rises automatically and does not interfere with the trunk lid. Adjust the bracket position if needed. If the shelf does not lift fully, reposition the brackets slightly and re-test.
Product Facts
- Auto-Lift kit for the Tesla Model S Parcel Shelf: Made in the USA and installs in a couple of minutes without any tools or drilling. You can complete the installation quickly and safely, and remove it later without leaving any trace on your vehicle.
Auto-Lift kit for the Tesla Model S Parcel Shelf
