Cybertruck Center Console Organizer Installation Guide
By Abstract Ocean | Tesla & Rivian Accessories | A Texas Co. est | Published: 2026-10-19
Category: How-to Guides
Learn how to install a lower center console tray in your Cybertruck. Step-by-step instructions, common mistakes, and storage tips.
Quick answer
Installing a Cybertruck lower center console tray takes about five minutes and requires no tools. Just clean the space, place the tray, and press it into position.
Why add a lower console tray?
The Cybertruck's lower console area—often called the opportunity space—is deep and open. Without a liner, small items slide around and collect dust. A fitted tray keeps chargers, coins, and sunglasses organized and easy to grab.
The tray also protects the bottom of the console from scratches and spills. Because it's made from TPE, it stays flexible in cold weather and won't crack like hard plastic.
Installation steps
- Step 1: Clear the lower console: Remove everything from the lower center console area. Lift out any existing mats or debris. Wipe the surface with a dry microfiber cloth to remove dust or crumbs. A clean surface helps the tray sit flat and prevents rattles. Skipping this step can leave grit under the tray that scratches the console.
- Step 2: Test-fit the tray: Hold the tray above the console opening and lower it gently into place. It should sit flush against the bottom and sides without forcing. The divided sections should face toward you for easy access. If the tray does not sit flush, check that you have the correct side facing up. The tray is symmetrical but the dividers are offset.
- Step 3: Press into position: Once aligned, press down firmly along the entire perimeter of the tray. You should hear or feel a slight click as the edges seat against the console walls. Run your fingers along the rim to ensure no gaps remain. Press evenly rather than in one spot. Uneven pressure can cause a corner to pop up later. If a gap persists, remove and realign the tray.
- Step 4: Load items and test for rattles: Place a few items—like a key card, charging cable, or coins—into the divided sections. Drive a short route over bumps or rough pavement. Listen for any rattling or movement. If items rattle, add a small microfiber cloth or rubber pad in the bottom of that section. The TPE material itself dampens most noise, but hard objects may still shift.
Product used in this guide
- Lower Center Console Tray/Organizer for Cybertruck: This liner fits the bottom of your Cybertruck lower console and provides divided storage. Made from TPE, it is semi-flexible, heavy-duty, and easy to clean with soapy water. The divided compartments prevent items from rattling together while driving, and the TPE material wipes clean if you spill coffee or dirt.
Lower Center Console Tray/Organizer for Cybertruck
After installation, you'll have a cleaner, quieter lower console. The tray stays in place during daily driving and can be removed for deep cleaning whenever needed.
