Back to Blog
Tips & Care 2026-11-20 Abstract Ocean | Tesla & Rivian Accessories | A Texas Co. est 0 views

Cybertruck Door Sill PPF Installation and Care Tips

Cybertruck Door Sill PPF Installation and Care Tips

Learn how to install and care for your Cybertruck door sill PPF film. This guide covers the pre-cut kit, installation steps, and maintenance tips to protect the vulnerable paint area from scuffs and scratches.

Why the Cybertruck Door Sill Needs Film

The Cybertruck's black sub-frame paint is a single layer. While tough, it's easy to scuff with dirty shoes, heels, or even spurs. The door sill area on all four doors takes the most abuse from entering and exiting. A clear PPF film protects this vulnerable paint without changing the look of the truck.

What the Door Sill PPF Kit Includes

  • Door Sill Protection Film (PPF) for Cybertruck: The kit includes 4 PPF cutouts (one per door) made for DIY installation, a spray bottle with slip concentrate (just add water), and a squeegee. Everything you need for a successful install is in the box, and the pre-cut design means no trimming or special skills required.
    Door Sill Protection Film (PPF) for Cybertruck
    Door Sill Protection Film (PPF) for Cybertruck
  • Door Sill Protection Film (PPF) for Cybertruck: The film is XPel Stealth PPF with a near-identical finish to the paint, making it virtually invisible once installed. You get protection without a noticeable film edge or gloss difference. The self-healing property also reduces visible wear over time.

Installation Steps (20 Minutes or Less)

The kit is designed for a simple DIY install. No heat gun or special skills are needed. Follow the supplied instructions and video for best results.

  1. Prepare the surface: Clean the door sill area thoroughly to remove dirt, wax, and debris. Use the included slip solution (water + concentrate) to wet the surface.
  2. Apply the film: Peel the backing from the pre-cut PPF piece. Wet the adhesive side with the slip solution. Position the film on the door sill and slide it into place. Use the squeegee to push out bubbles and excess liquid.
  3. Squeegee and dry: Work from the center outward with the squeegee. Let the film dry naturally. The self-healing PPF will smooth out minor marks with heat from the sun.
  4. Repeat for all four doors: Each cutout is specific to its door. Install in the same sequence for all entries.

Care That Keeps the Film Clear

The XPel Stealth PPF is self-healing. Small scratches or scuffs can be reduced by leaving the truck in the sun or applying gentle heat. For regular cleaning, use a mild soap and water solution. Avoid abrasive cleaners or scrubbing pads. The film is easy to remove and replace if needed, so you can refresh the protection when the film shows wear.

Pairing with Other Protection

For full entry protection, consider pairing the door sill film with the B-Pillar PPF kit. The B-pillar area is also prone to scratches and fingerprints, and the same XPel Stealth film provides a consistent, invisible shield across both surfaces.

Related Articles

Customer Service
Home
Products
Cart
Profile