Cargo Crossbars Wall Mount for Rivian R1T/R1S: Storage FAQ
By Abstract Ocean | Tesla & Rivian Accessories | A Texas Co. est | Published: 2026-11-04
Category: Recensioni prodotti
Straight answers on storing Rivian R1T and R1S cargo crossbars on a wall mount: orientation, hardware, clearance, and when a wall rack beats a shelf.
Quick answer
A dedicated wall mount is the cleanest way to keep Rivian cargo crossbars off the garage floor and out of the way between trips. Mount it to solid framing, decide vertical or horizontal orientation based on your wall space, and store both bars together on one frame.
Why a wall mount beats leaning crossbars in a corner
Leaning crossbars against a wall invites two problems: they slide, and the rubber contact surfaces pick up grit from the floor. A wall mount holds the bars at a fixed height and keeps the mounting feet off concrete. It also frees floor space in a garage that already has a truck, a charger, and seasonal gear competing for room.
The trade-off is installation. A wall mount needs solid anchoring, so you will spend more time on placement than you would tossing the bars on a shelf. If you rent or move often, that matters.
Vertical or horizontal: which orientation fits your garage
Orientation is mostly about wall real estate. Mounting the frame vertically holds the crossbars in a horizontal position, which suits a tall, narrow strip of wall between a door and a cabinet. Mounting horizontally holds the bars vertically, which can tuck them into a lower, wider space. Measure the longest bar and add clearance on both ends before you commit, and check that the chosen height keeps the bars above shin level and below head level.
When a wall mount is the wrong choice
If your crossbars come off only once or twice a year, a padded shelf or a ceiling hoist may be simpler. A wall mount earns its keep when you remove and refit the bars regularly, because the snap-in frame makes the routine repeatable. Also skip wall mounting on drywall alone, thin paneling, or a wall you cannot verify has framing behind it.
Rivian crossbar storage questions, answered
- Will this wall mount fit both R1T and R1S crossbars?
- The mount is listed for Rivian R1T and R1S cargo crossbars. Because Rivian has offered more than one crossbar design, confirm your bars match the mount's frame before drilling. If your bars have a different profile, the snap-in fit may not engage. Test-fit the bars on the frame before you mark any holes.
- How high should I mount it?
- Set the frame so the stored bars sit between roughly knee and shoulder height. That keeps the ends out of walking paths and lets you lift the bars on and off without a ladder. Leave at least a few inches of clearance at each end of the longest bar.
- What hardware do I need?
- Use fasteners rated for the wall substrate and long enough to reach solid framing. The product listing does not specify included hardware, so check the box contents before you start and buy lag screws or heavy-duty anchors if needed. Do not rely on drywall anchors alone for two metal bars. Check the box for hardware before your first trip to the hardware store.
- Can I store the crossbars with the mounting feet attached?
- Yes, the frame is designed to hold the crossbars as a pair. Keep the rubber contact surfaces clean and dry before hanging them so grit does not transfer to your roof rails next time.
- Is a wall mount better than a ceiling hoist?
- A wall mount is simpler to install and keeps the bars at hand. A ceiling hoist frees wall space but adds pulleys and rope. Choose the wall mount if you have a suitable wall; choose a hoist only if wall space is genuinely unavailable.
- What does it cost?
- The catalog price is USD 28.36, with a comparison price of USD 39.95. That puts it well below the cost of most crossbar sets, which is the main argument for protecting them with a dedicated holder rather than a makeshift hook.
Product facts
- Cargo Crossbars Wall Mount for Rivian R1T/R1S: The mounting frames can hold both cargo crossbars at the same time, and the bars snap into place. You store the pair as one unit instead of juggling two loose bars, and refitting them for a trip takes seconds.
Cargo Crossbars Wall Mount for Rivian R1T/R1S
