How to Install XPEL Armor Door Inserts on Cybertruck

By Abstract Ocean | Tesla & Rivian Accessories | A Texas Co. est | Published: 2026-10-25

Category: How-to Guides

Learn how to install XPEL Armor Door Inserts on your Cybertruck in a few simple steps. This guide covers preparation, application, and common mistakes to avoid.

Quick Answer

Installing XPEL Armor Door Inserts on your Cybertruck takes about 10 minutes and requires only a clean surface and a squeegee. Follow the steps below for a bubble-free, durable finish.

Why Add Door Inserts?

The Cybertruck's door shelves feel hollow and can scratch easily. XPEL Armor inserts add a textured satin black layer that protects against scuffs and daily wear while improving the look of the interior.

What You'll Need

You only need the XPEL Armor Door Insert kit (two pieces, one for each front door), a microfiber cloth, isopropyl alcohol or a mild cleaner, and a squeegee or credit card wrapped in a soft cloth.

Installation Steps

Clean the Door Shelf Surface: Wipe the door shelf area with a microfiber cloth and isopropyl alcohol to remove dust, grease, and residue. Let it dry completely. Common mistake: skipping cleaning can cause the film to lift or trap dirt underneath.
Peel and Position the Insert: Peel the backing from one XPEL Armor insert. Align it with the door shelf, starting from one edge. Press gently to hold it in place. Common mistake: touching the adhesive side with fingers leaves oils that reduce adhesion.
Squeegee Out Air Bubbles: Use a squeegee or wrapped credit card to push from the center outward, removing air bubbles and ensuring full contact. Common mistake: pressing too hard can stretch the film; use firm but gentle pressure.
Repeat for the Second Door: Follow the same steps for the other front door shelf. Allow the film to cure for 24 hours before heavy contact. Checkpoint: after 24 hours, inspect edges for lifting and press down if needed.

Product Details

Xpel Armor Door Inserts for Cybertruck: This kit comprises two pieces for the door 'shelf' on each of the front doors. XPEL Armor is 23mil (0.6mm) thick with a textured satin black finish. The 23mil thickness provides durable protection against scratches and scuffs without adding bulk, and the satin finish blends seamlessly with the Cybertruck interior.
Xpel Armor Door Inserts for Cybertruck